Menu
  • Znjadz oddzial
  • 0

    W moim koszyku

     Do kasy Long Arrow icon
  • (en)
  1. Strona glówna
  2. Beam
  3. I Beam
  4. IPE Beam

IPE Beam

Standardowa jakosc

Beam section

Zobacz wiecej
Standardowa jakosc

Length (mm)

Zobacz wiecej
Standardowa jakosc

Process sub familyZobacz nasz przewodnik !

Zobacz wiecej
Standardowa jakosc

GradeZobacz nasz przewodnik !

Zobacz wiecej
Nie masz konta? Wprowadz kod pocztowy, aby zobaczyc ceny
  • Belgium
  • France
  • Germany
  • Netherlands
  • Poland
  • Spain
  • Switzerland
Masz juz konto? Zaloguj sie, aby zobaczyc swoje ceny

IPE beams are hot-rolled steel products. Prepared with a silicon content ranging between 0.15% and 0.25%. They are suitable for zinc coating.The central part of the beam is called ”the core” while its sides are called ”wings” or ”flanges”.The beams, regardless of their shape (I, H or U), have the following common characteristics:

  • height greater than or equal to 80 mm
  • normally symmetrical wings of equal width
  • the outer faces of the wings are parallel
  • the wings either have thickness that gradually decreases from the core towards the edge (so-called ”inclined wings” sections) or have constant thickness (so-called ”parallel wings” sections).
  • The surface of the cores is connected to the inner faces of the wings by fillets.The grey, marbled or rough areas may appear but have no effect on the corrosion resistance.The beam is characterised by the following dimensional elements:
  • The widths and thickness of the core and wings
  • The radius between the wing and core

    • Wybierz wszystkie cechy, aby wyswietlic tabele specyfikacji technicznych